上传并安装SSL-V\/P\/N\/-Client到路由器【图文】

2020-05-27 08:49:00 编辑小周

原标题:"上传并安装SSL-V\/P\/N\/-Client到路由器【图文】"关于路由器的常识分享。 - 素材来源网络 编辑:kaka。

在本尝试中,为了使路由器支撑sslV\/P\/N\/需要上传并安装SSL-V\/P\/N\/-Client到路由器。由此为前提来模拟sslV\/P\/N\/的安全技术。sslV\/P\/N\/配置下节尝试做推荐。在上传安装ssl-V\/P\/N\/-client之前,先搭建tftp服务器,本次试验用的是cisco tftp server 1.1。测试路由器和tftp server的连通性R1#ping 192.168.1.2Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 8/17/36 ms
R1#路由器和tftp服务器成功通信,下面我来上传ssl-V\/P\/N\/-client
  • 释放disk0空间用作存储上传文件
    R1#format disk0:
    Format operation may take a while. Continue? [confirm]
    Format operation will destroy all data in "disk0:". Continue? [confirm]
    Format: Drive communication & 1st Sector Write OK...
    Writing Monlib sectors.
    .....................................................................................................................................................
    Monlib write completeFormat: All system sectors written. OK... Format: Total sectors in formatted partition: 130883
    Format: Total bytes in formatted partition: 67012096
    Format: Operation completed successfully. Format of disk0 comple
    • 上传ssl-V\/P\/N\/-client R1#copy tftp: disk0:
      Address or name of remote host []? 192.168.1.2
      Source filename []? sslclient.pkg
      Destination filename [sslclient.pkg]?
      Accessing tftp://192.168.1.2/sslclient.pkg...
      Loading sslclient.pkg from 192.168.1.2 (via FastEthernet1/0): !!!!!!!!!
      [OK - 2208871 bytes] 2208871 bytes copied in 56.880 secs (38834 bytes/sec)
      • 安装ssl-V\/P\/N\/-client R1#conf t
        Enter configuration commands, one per line. End with CNTL/Z.
        R1(config)#webV\/P\/N\/install svc disk0:/sslclient.pkg
        SSLV\/P\/N\/Package SSL-V\/P\/N\/-Client : installed successfully R1(config)#成功上传并安装了ssl-V\/P\/N\/-client,这台路由器支撑sslV\/P\/N\/了。

        本文出自 “阅微草堂笔记” 博客,请务必保留此出处http://loverain.blog.51cto.com/2271638/824709


慎重声明:本文版权归原编辑所有,转载文章仅为传播更多信息之目的,如编辑信息标记有误,请第一时间联系我们修改或删除,多谢。